FRISTAM Pumpen Schaumburg
Chemical Pumps
Chemical Pumps
FRISTAM VPS twin screw pumps reliably convey demanding media in the chemical industry, including products with varying viscosities and abrasive properties.
They ensure gentle, low-pulsation conveying with a high level of process reliability.
Pumps for Alkane Sulfonates, Salts and Emulsions
Reliable conveying of alkane sulfonates, salts and emulsions in detergents, care products and specialty chemicals. Suitable for different viscosities and demanding conveying conditions.
Discharge Pump
VPS pumps are suitable for alkane sulfonates, salts and emulsions used in detergents, care products and specialty chemicals. They are designed for different viscosity and suction pressure ranges and provide reliable discharge and conveying.
Typical Processes
- Dosing and filling
- Production and mixing
- Transfer and conveying
Design
- Housing: 1.4404
- Conveying screws: 1.4404
- ATEX, TA-Luft
Typical Operating Data
| Temperature range | 8–110 °C |
| Viscosity | 150–3,500 mm²/s |
| Flow rate | 1–7 m³/h |
| Suction pressure | −0.2 to −0.5 bar |
| Differential pressure | 6 bar |
Pumps for Liquid Sulfur
Reliable conveying of liquid sulfur requires precise temperature control throughout the process. If the medium cools down, it can solidify inside the pump. A heated pump design helps maintain a constant temperature and ensures safe, continuous conveying.
Heated Pump Design
VPS pumps for liquid sulfur can be equipped with a heating jacket in the pump housing. This keeps the medium at a stable temperature, reduces the risk of solidification and supports reliable conveying throughout the process.
Typical Processes
- Conveying and transfer of liquid sulfur
- Discharge from tanks and vessels
- Circulation within the process
Design
- Housing: GP240GH
- Conveying screws: 1.4404
- ATEX, TA-Luft
Typical Operating Data
| Temperature range | 135–140 °C |
| Viscosity | 7.75 mm²/s |
| Flow rate | 60–90 m³/h |
| Suction pressure | −0.5 bar |
| Differential pressure | 6.3 bar |
Pumps for Paints and Coatings
Paints, coatings and glazes place different demands on pumping systems due to their varying formulations. Pigments, binders, solvents and other additives influence viscosity, flow behaviour and material compatibility. Reliable, gentle and low-pulsation conveying is therefore essential.
Hobbock Filling
VPS pumps are suitable for filling hobbocks and other containers with paints, coatings and similar products. They provide precise, low-pulsation conveying and support gentle product handling. Good cleanability is particularly important when colours or product variants change frequently.
Typical Processes
- Hobbock and container filling
- Dosing and filling
- Conveying and transfer
- Product change and cleaning
Design
- Housing: 1.4404
- Conveying screws: 1.4404
- ATEX, TA-Luft
Typical Operating Data
| Temperature range | 10–30 °C |
| Viscosity | 50 mm²/s |
| Flow rate | 15 m³/h |
| Suction pressure | −0.3 bar |
| Differential pressure | 4 bar |
Ihre Pumpe konfigurieren
Die passende Pumpe für Ihre Anwendung
Je nach Medium, Viskosität, Temperatur und Förderaufgabe kommen unterschiedliche Pumpenausführungen zum Einsatz. Finden Sie die passende FRISTAM Lösung für Ihre Anwendung.
