FRISTAM Pumpen Schaumburg
Pumps for Tank Terminals
Gasoline and middle distillates must be transferred reliably and at high flow rates in tank terminals. Depending on the product and operating conditions, viscosity and flow requirements can vary significantly. Good suction performance, reliable residual emptying and a wide operating range are therefore essential.
VPS pumps are suitable for fast unloading of tanks and rail tank cars containing gasoline and middle distillates. Their wide flow range supports both lower and very high volume flows, enabling efficient product handling in tank terminals.
Typical Processes
Design
| Temperature range | −10–30 °C |
| Viscosity | 0.8–10 mPas |
| Flow rate | 78–380 m³/h |
| Suction pressure | −0.5 bar |
| Differential pressure | 6.0 bar |
In tank terminals, different media such as gasoline, middle distillates, crude oil and water must be conveyed reliably and completely removed from tanks or pipelines. Good suction performance, safe operation with changing media and effective residual emptying are therefore particularly important.
VPS pumps are suitable as mobile residual and unloading pumps for different media in tank terminals. Their good suction performance enables reliable removal and transfer of residual quantities. For gas-liquid mixtures and operation in hazardous areas, a suitable ATEX design is particularly important.
Typical Processes
Design
| Temperature range | −10–30 °C |
| Viscosity | 0.75–400 mPas |
| Flow rate | 10–40 m³/h |
| Suction pressure | −0.5 bar |
| Differential pressure | 6.5 bar |
Fatty alcohols are used as raw materials for creams, ointments and other chemical products. Reliable product receiving, gentle conveying and flexible transfer between tanks and process stages are particularly important.
VPS pumps are suitable for receiving and transferring fatty alcohols in reversible operation. This allows the medium to be conveyed safely in both directions and transferred flexibly between storage and process tanks.
Typical Processes
Design
| Temperature range | 45–80 °C |
| Viscosity | 1–12 mPas |
| Flow rate | 100 m³/h |
| Suction pressure | −0.7 bar |
| Differential pressure | 3–4 bar |
Configure your pump
Depending on the medium, viscosity, temperature and pumping task, different pump configurations may be required. Find the right FRISTAM solution for your application.
